Chelmer's Reliable Stormwater Drainage Team

Persistent yard flooding usually points to a specific fault in the stormwater system rather than simply too much rain. Common causes include a blocked or collapsed stormwater pipe, a pit filled with silt and leaves, downpipes that aren't properly connected, or a yard that was never graded to direct water to a legal discharge point. A proper inspection can identify exactly where the water should be going and why it isn't.

Yes, tree roots are one of the most common causes of stormwater pipe damage in established, leafy suburbs. Roots are drawn to the moisture inside stormwater pipes and can work their way into small cracks or joints over time, eventually causing blockages or even collapsing the pipe. Depending on the extent of the damage, this can often be repaired through relining rather than digging up the entire pipe.

Some stormwater drainage work, particularly anything affecting the legal point of discharge, interallotment drainage or connections to council infrastructure, may need to meet specific council requirements. A licensed plumber can advise whether your particular job needs approval and will ensure the finished work complies with the relevant regulations, so you don't run into issues later on.

Pooling water near a driveway, path or the foundations of your home is worth investigating sooner rather than later, as it can indicate a blocked or damaged stormwater pipe beneath the surface. Left unattended, this can lead to soil erosion, cracked paving or moisture problems inside the home. Arranging an inspection early usually means a simpler and less disruptive fix.

If your property experiences repeated flooding, ageing clay pipes, or a stormwater system that was never sized for the current roof and paved area, a repair might only offer a temporary fix. A plumber experienced in stormwater design can assess whether your existing pits, pipes and connections are still adequate, or whether an upgrade would provide a more permanent solution.